|
|
450 Power & Data Distribution Strip
Overview
Altman Lighting’s 450 Series Connector Strips feature rugged steel construction, innovative data distribution, and a wide array of available connector types and hanging hardware. Each Connector Strip is custom built for the specifications of the project.
Pigtail and flush mount load connectors are prewired to spring loaded terminals at the feed end of the strip. Connector Strips are available with Active and Passive
DMX-512/RDM & Ethernet Data management and can be mounted horizontally or vertically, dead hung or attached to movable rigging sets. The 450 is suitable for installation in theatres, television studios, or anywhere a system of permanent circuit distribution and data distribution for conventional, LED, and automated luminaires is desired.
Specifications
STEEL CONNECTOR STRIP with Optional Data Distribution
Features:
- Rugged 18 gauge steel construction with 14 gauge end caps and joiners. Center holes on end caps provided for conduit fittings
- A variety of flush mount and pigtail connectors are available for 20amp, 30amp, 50amp, and 50amp circuits. Individual circuits can be wired to multiple pigtails or receptacles.
- Active or passive data management for distribution of DMX-512A/ RDM to distributed dimmers, automated fixtures, and LED Luminaires.
- Optional per Circuit indicator lamps available.
- Easy to ship, assemble, and service.
- Din Rail mounted screwless spring terminals for termination of 20amp loads (up to #8awg). Screw Terminals for 30amp, 50amp, and 100amp wiring.
- Din Rail mounted control box for integration of DMX- 512A/ RDM Opto Splitters, Ethernet nodes, and other DIN rail mounted control devices.
- Standard 2” high white vinyl numbers for circuit identification on one side. Numbering on both sides, custom vinyl colors, and lamicoid circuit identification plates are available.
- 1-Tool Assembly (#2 Phillips Screwdriver)
- ETL & cETL pending for Indoor use
- Made in the USA
Downloads
|
|
About Altman
